Telix .MDM modem definition file -- revision history _______________________________________________________________________ v2.01 [10/04/91] ----------------------------------------------------------------------- Added the following modems: AT&T CEO Best Data Smart One 2400 Cardinal 96/24 Fax Modem Cardinal v.32/v.42bis external Codex 3260 Compaq Stock v.42bis Data Trek 2424 MNP Data Trek 624 Data Trek v.32 Dell Faxmodem Digitan High-IQ Fax Modem E*Tech Bullet 2400 MNP E*Tech Bullet v.32 GVC v.32 GVC v.42bis Hayes ISDN Terminal Interface Intel 2400B Intel 2400B w/ MNP LightCom 96 v.32 Miracom Keycard 2400 Miracom Keycard 3000 Miracom WS4000/PC 300 Miracom (UK) - See US Robotics MicroCom QX 2400/t MicroCom AX1200 / AX2400 (as differentiated from those with compression) Okidata Okitel CLP/296 Pace 300 internal Pace 1200 Pace Series IV Pace UltraLink Quad Pace Ultralink v.32 Penrill Alliance DataLink 1200 Penrill Alliance DataLink 2400 Practical Peripherals v.42bis Quicktel v.32/v.42 Racal Vadic 2400 VP MNP (as differentiated from the 2400 VP) Supra 2400 MNP Supra 2400 Plus v.42bis Supra 9600 v.32 Telebit T1000 Telebit Internal MNP UDS FastTalk v.32/V.42 Zeos Notebook MNP Zoom 1200 Corrected autobaud detect on: Anchor 2400i Cardinal 2400 non-MNP Practical Peripherals 2400 non-MNP Racal Vadic 2400 VP Ventel Pathfinder Zoom HC2400 v.42 Corrected Hayes Ultra (removed bad command). Thanks Eddie Peel! Corrected DTE rate of Racal VP 2400. Thanks Douglas Bennett! Corrected Computer Periph'l ViVa prefixes. Thanks Joe Rodriguez! Changed the MNP/v.42 buffer size of the Image Twincom for better speed. v2.00 [08/26/91] ----------------------------------------------------------------------- Modified the format slightly to fit the new MODEMCFG v. 2.0 structures. USR Sportster : Changed X6 to X4 for older models Added the Image TwinCom 96/42i internal v.32 modem. Please do NOT alter these settings, as an anomaly in the Twincom causes it NOT to accept an ATZ from Telix. ATZ will LOCK up the modem! v1.05 ----------------------------------------------------------------------- Moved several models' S7/S11 settings to the init string from NRAM. Added: Cardinal 9600 v.32 USR Sportster 2400 MNP VivaModem 24m Incomm Classic 2400 Corrected Ventel 2400-33 (same type as the Pathfinder had). Corrected UDS v.32 modem (NRAM settings modified) Corrected Zooms v1.04 05/18/91 ----------------------------------------------------------------------- Fixed a typo in the Ventel Pathfinder. Zoom modems changed X4 to X3. CTS Datacomm fixed typo (^C1 to &C1). Corrected area around Incomm 2400EC causing display errors. Dropped the DTE rates for the following modems back to 4800: Cardinal 2400 MNP and Everex 24+. Fixed a minor typo and rearranged the order of options on the Intel. Correction made to the Practical Peripherals to allow proper DTR operation v1.03 05/01/91 ----------------------------------------------------------------------- Differentiated between Practical Peripherals SA and SA/MNP modems. Differentiated between Cardinal 2400 and 2400/MNP modems. Differentiated between a couple of ZOOM models. Changed &B7 to &B1 in the USR v.32bis modem and added the &W command USR VarModem switch 10 position reversed. GVC 2400 was not saving settings properly in NRAM -- fixed Added the Incomm 2400EC modem. Made minor changes to the Forval string on the advice of Forval Tech Increased DTE rate of several modems with v.42bis to 38,400 from 19,200 including the PM9600SA and a couple of USR models. Made several changes to the Racal Vadic series for error correction control, flow control, and better throughput. Thanks Jerry Buxton! Changed X1 to X4 for the Hayes 1200B modems. Thanks Bruce Wilson! v1.02 04/05/91 ----------------------------------------------------------------------- Added GVC MNP-5 modem to the modem set. Added Forval modems to the modem set. Corrected a parameter to the Intel 9600EX for high speed connects. Corrected switch settings for Okidata OkiTel 9600 on advice of Okidata Corrected &H setting on the Fastcomm 9696 v.32 modem. Corrected situation one a few modems where two kinds of flow control were set to active simultaneously. While this would not affect connect rates, it might affect throughput by a few cps. Allowed for a bug in one revision of the ATI 2400 etc/e v.42 where the &F2 directive incorrectly set the v.42 &K register to 2 rather than 3 where it should be for v.42 handshaking. Fixed by explicitly adding &K3 to the NRAM settings. v1.01 04/03/91 ----------------------------------------------------------------------- Corrected typographical error and switch settings for US Robotics HST v1.00 04/02/91 ----------------------------------------------------------------------- Initial release with Telix in TLX315-2.ZIP.