[CIF] DISPLAY=0:"VIA V-RAID Config Utility" COMPONENT_VERSION="V5.90" DESC=0:"VIA V-RAID Config and Monitor Utility" DATE=0,,20100223; HWID=4:PCI\VEN_1106&CC_0104;PCI\VEN_1106&CC_0106; CID={80F8D277-5915-4015-BFC3-7B37A4429088} CIFVERSION=1.2 SIZE=1200 SHOW=1 ; ;Information: As mentioned at VIA V-RAID Software Package Release Note, we provided two control flags bits ; at bit 6/7 inside the 5th parameters of INSTCMD/SILENT_INSTCMD. Their descriptions are listed as ; below: ; ; Bit 6: "Force-Running Mode", 1: enabled, 0: disabled ; Bit 7: "Auto-Start Dialog box control", 1:enabled/on, 0:disabled/off ; ; Note: 1. If silence mode installation, Bit 7 is in-effective, only bit 6 can be used. ; 2. These control bits are only workable at NT5 family OS(above Win2K OSes, included). In other word, ; Only [EXEC.ntx86]/[EXEC.ntamd64] can use these control flag bits of 5th parameter. ; [EXEC.9x] INSTCMD=0x107,,2,RaidUtl.InstallRAID_Utility,1,VIA V-RAID; UNINSTCMD=0x107,,2,RaidUtl.UninstallRAID_Utility,1,VIA V-RAID; ;REBOOT=0,1 REBOOT=0,0 [EXEC.nt] INSTCMD=0x201,,2,RaidUtlNT.InstallRAID_Utility_NT,0,VIA V-RAID; UNINSTCMD=0x201,,2,RaidUtlNT.UninstallRAID_Utility_NT,0,VIA V-RAID; ;REBOOT=0,1 REBOOT=0,0 [EXEC.ntx86] INSTCMD=0x23E,,2,RaidUtl.InstallRAID_Utility,192,VIA V-RAID; UNINSTCMD=0x23E,,2,RaidUtl.UninstallRAID_Utility,0,VIA V-RAID; ;Enable Force-running mode under silent mode SILENT_INSTCMD=0x23E,,2,RaidUtl.SilentInstallRAID_Utility,64,VIA V-RAID; ;Disable Force-running mode under silent mode ;SILENT_INSTCMD=0x23E,,2,RaidUtl.SilentInstallRAID_Utility,0,VIA V-RAID; ;REBOOT=0,1 REBOOT=0,0 [EXEC.ntia64] [EXEC.ntamd64] INSTCMD=0x40F,,2,RaidUtl.InstallRAID_Utility,196,VIA V-RAID; UNINSTCMD=0x40F,,2,RaidUtl.UninstallRAID_Utility,4,VIA V-RAID; ;Enable Force-running mode under silent mode SILENT_INSTCMD=0x40F,,2,RaidUtl.SilentInstallRAID_Utility,68,VIA V-RAID; ;Disable Force-running mode under silent mode ;SILENT_INSTCMD=0x40F,,2,RaidUtl.SilentInstallRAID_Utility,4,VIA V-RAID; ;REBOOT=0,1 REBOOT=0,0 [STRING]